Trailer caravan car light tester testbox
Trailer light tester 12150
User manual 12150
Product sheet 12150
Part no. |
12150 |
7-pole Socket
Use of Trailer Light Tester:
With its built-in battery and small size, the trailer light tester can be easily and quickly transported around to the various trailers and caravans.
Trailer light tester / Control box is used for checking, troubleshooting and repairing lights on trailers and caravans with both incandescent light bulbs and LED lights.
LED lights on vehicles:
The use of LED taillights on trucks, trailers and caravans can in some cases cause problems when testing the trailer, as the LED lights do not like pulsed direct current.
We Raco and G.S.E have now eliminated this problem by replacing the transformer in the trailer light tester with a DC/DC DC-supply.
Data:
The images are illustrative and may differ from the originals.
Trailer caravan car light tester testbox
Specifications trailer light tester:
* It is equipped with short-circuit protection.
* It is in an impact-resistant ABS cabinet with a practical handle and is easy to use for daily workshop use.
* In the event of a short circuit or overload, the LED for the main switch will turn off.
* There is a power/switch with LED for each function, as well as a main switch.
* By pressing “BAT TEST“, the battery is charged and the battery LEDs will indicate the battery condition before use.
* It is equipped with a battery indicator that shows:
100% charged = 13.5 V
50% charged = 12.0 V
25% charged = 11.0 V Should be charged.
* The trailer light tester is protected against reversed polarity, overload with 8 Amp automatic circuit breaker.
* Switches are guaranteed for 20 Amp load.
Technical specifications:
| Voltage: | 12 V |
| Battery charger: | 5.5mm DC jack Includedt |
| Battery: | 5 A |
| Battery indicator: | 100 % charged = 13.5 V 50 % charged = 12.0 V 25 % charged = 11.0 V |
| Output voltage: | 12.6 V |
| Dimensions: | L: 225 mm H: 120 mm W: 90 mm |
| Weight: | 2.4 kg. |
| Max. Power: | 8 Amp. |
| Operating time: | About 3 hours (Output activated) |
| Plug: | 7-pole ISO 1724 Socket |
Trailer light tester 12151
User manual 12151
Product sheet 12151
Part no. |
12151 |
13-pole Socket
Use of Trailer Light Tester:
With its built-in battery and small size, the trailer light tester can be easily and quickly transported around to the various trailers and caravans.
Trailer light tester / Control box is used for checking, troubleshooting and repairing lights on trailers and caravans with both incandescent light bulbs and LED lights.
LED lights on vehicles:
The use of LED taillights on trucks, trailers and caravans can in some cases cause problems when testing the trailer, as the LED lights do not like pulsed direct current.
We Raco and G.S.E have now eliminated this problem by replacing the transformer in the trailer light tester with a DC/DC DC-supply.
Data:
The images are illustrative and may differ from the originals.
Trailer caravan car light tester testbox
Specifications trailer light tester:
* It is equipped with short-circuit protection.
* It is in an impact-resistant ABS cabinet with a practical handle and is easy to use for daily workshop use.
* In the event of a short circuit or overload, the LED for the main switch will turn off.
* There is a power/switch with LED for each function, as well as a main switch.
* By pressing “BAT TEST“, the battery is charged and the battery LEDs will indicate the battery condition before use.
* It is equipped with a battery indicator that shows:
100% charged = 13.5 V
50% charged = 12.0 V
25% charged = 11.0 V Should be charged.
* The trailer light tester is protected against reversed polarity, overload with 8 Amp automatic circuit breaker.
* Switches are guaranteed for 20 Amp load.
Technical specifications:
| Voltage: | 12 V |
| Battery charger: | 5.5mm DC jack Includedt |
| Battery: | 5 A |
| Battery indicator: | 100 % charged = 13.5 V 50 % charged = 12.0 V 25 % charged = 11.0 V |
| Output voltage: | 12.6 V |
| Dimensions: | L: 225 mm H: 120 mm W: 90 mm |
| Weight: | 2.4 kg. |
| Max. Power: | 8 Amp. |
| Operating time: | About 3 hours (Output activated) |
| Plug: | 13-pole ISO 111446 Socket |
Trailer light tester 12152
User manual 12152
Product sheet 12152
Part no. |
12152 |
7-pole & 13-pole Socket
Use of Trailer Light Tester:
With its built-in battery and small size, the trailer light tester can be easily and quickly transported around to the various trailers and caravans.
Trailer light tester / Control box is used for checking, troubleshooting and repairing lights on trailers and caravans with both incandescent light bulbs and LED lights.
LED lights on vehicles:
The use of LED taillights on trucks, trailers and caravans can in some cases cause problems when testing the trailer, as the LED lights do not like pulsed direct current.
We Raco and G.S.E have now eliminated this problem by replacing the transformer in the trailer light tester with a DC/DC DC-supply.
Data:
The images are illustrative and may differ from the originals.
Trailer caravan car light tester testbox
Specifications trailer light tester:
* It is equipped with short-circuit protection.
* It is in an impact-resistant ABS cabinet with a practical handle and is easy to use for daily workshop use.
* In the event of a short circuit or overload, the LED for the main switch will turn off.
* There is a power/switch with LED for each function, as well as a main switch.
* By pressing “BAT TEST“, the battery is charged and the battery LEDs will indicate the battery condition before use.
* It is equipped with a battery indicator that shows:
100% charged = 13.5 V
50% charged = 12.0 V
25% charged = 11.0 V Should be charged.
* The trailer light tester is protected against reversed polarity, overload with 8 Amp automatic circuit breaker.
* Switches are guaranteed for 20 Amp load.
Technical specifications:
| Voltage: | 12 V |
| Battery charger: | 5.5mm DC jack Includedt |
| Battery: | 5 A |
| Battery indicator: | 100 % charged = 13.5 V 50 % charged = 12.0 V 25 % charged = 11.0 V |
| Output voltage: | 12.6 V |
| Dimensions: | L: 225 mm H: 120 mm W: 90 mm |
| Weight: | 2.4 kg. |
| Max. Power: | 8 Amp. |
| Operating time: | About 3 hours (Output activated) |
| Plug: | 7-pole ISO 1724 13-pole ISO 11446 Socket |
Trailer light tester 12155
User manual 12155
Product sheet 12155
Part no. |
12155 |
13-pole Socket
Automatic function change
Use of Trailer Light Tester:
With its built-in battery and small size, the trailer light tester can be easily and quickly transported around to the various trailers and caravans.
Trailer light tester / Control box is used for checking, troubleshooting and repairing lights on trailers and caravans with both incandescent light bulbs and LED lights.
LED lights on vehicles:
The use of LED taillights on trucks, trailers and caravans can in some cases cause problems when testing the trailer, as the LED lights do not like pulsed direct current.
We Raco and G.S.E have now eliminated this problem by replacing the transformer in the trailer light tester with a DC/DC DC-supply.
Data:
The images are illustrative and may differ from the originals.
Trailer caravan car light tester testbox
Specifications trailer light tester:
* What is special about this trailer light tester is that it has running lights, which saves unnecessary walking back and forth during testing.
* Set the button to automatic and the LEDs of the various functions light up / flash alternately at a few seconds interval.
* If manual operation is required for repairs and the like. If the main switch is set to ON, the individual functions can be activated individually.
* It is equipped with short-circuit protection.
* It is in an impact-resistant ABS cabinet with a practical handle and is easy to use for daily workshop use.
* In the event of a short circuit or overload, the LED for the main switch will turn off.
* There is a power/switch with LED for each function, as well as a main switch.
* By pressing “BAT TEST“, the battery is charged and the battery LEDs will indicate the battery condition before use.
* It is equipped with a battery indicator that shows:
100% charged = 13.5 V
50% charged = 12.0 V
25% charged = 11.0 V Should be charged.
* The trailer light tester is protected against reversed polarity, overload with 8 Amp automatic circuit breaker.
* Switches are guaranteed for 20 Amp load.
Technical specifications:
| Special | Automatic function change |
| Voltage: | 12 V |
| Battery charger: | 5.5mm DC jack Includedt |
| Battery: | 5 A |
| Battery indicator: | 100 % charged = 13.5 V 50 % charged = 12.0 V 25 % charged = 11.0 V |
| Output voltage: | 12.6 V |
| Dimensions: | L: 225 mm H: 120 mm W: 90 mm |
| Weight: | 2.4 kg. |
| Max. Power: | 8 Amp. |
| Operating time: | About 3 hours (Output activated) |
| Plug: | 13-pole ISO 11446 Socket |
Trailer light tester 12156
User manual 12156
Product sheet 12156
Part no. |
12156 |
7-pole & 13-pole Socket
Automatic function change
Use of Trailer Light Tester:
With its built-in battery and small size, the trailer light tester can be easily and quickly transported around to the various trailers and caravans.
Trailer light tester / Control box is used for checking, troubleshooting and repairing lights on trailers and caravans with both incandescent light bulbs and LED lights.
LED lights on vehicles:
The use of LED taillights on trucks, trailers and caravans can in some cases cause problems when testing the trailer, as the LED lights do not like pulsed direct current.
We Raco and G.S.E have now eliminated this problem by replacing the transformer in the trailer light tester with a DC/DC DC-supply.
Data:
The images are illustrative and may differ from the originals.
Specifications trailer light tester:
* What is special about this trailer light tester is that it has running lights, which saves unnecessary walking back and forth during testing.
* Set the button to automatic and the LEDs of the various functions light up / flash alternately at a few seconds interval.
* If manual operation is required for repairs and the like. If the main switch is set to ON, the individual functions can be activated individually.
* It is equipped with short-circuit protection.
* It is in an impact-resistant ABS cabinet with a practical handle and is easy to use for daily workshop use.
* In the event of a short circuit or overload, the LED for the main switch will turn off.
* There is a power/switch with LED for each function, as well as a main switch.
* By pressing “BAT TEST“, the battery is charged and the battery LEDs will indicate the battery condition before use.
* It is equipped with a battery indicator that shows:
100% charged = 13.5 V
50% charged = 12.0 V
25% charged = 11.0 V Should be charged.
* The trailer light tester is protected against reversed polarity, overload with 8 Amp automatic circuit breaker.
* Switches are guaranteed for 20 Amp load.
Technical specifications:
| Special | Automatic function change |
| Voltage: | 12 V |
| Battery charger: | 5.5mm DC jack Includedt |
| Battery: | 5 A |
| Battery indicator: | 100 % charged = 13.5 V 50 % charged = 12.0 V 25 % charged = 11.0 V |
| Output voltage: | 12.6 V |
| Dimensions: | L: 225 mm H: 120 mm W: 90 mm |
| Weight: | 2.4 kg. |
| Max. Power: | 8 Amp. |
| Operating time: | About 3 hours (Output activated) |
| Plug: | 7-pole ISO 1724 13-pole ISO 11446 Socket |