Send us an email with your order: order@raco.dk

TRAILER LIGHT TESTS 12V-24V – CONTROL BOX – 12125

Order no .: 12125
Dimensions: L. 300 MM x B. 225 MM x H. 130 MM
Weight 4.3 kg.
Comes with 2 meter net cable

 

* Trailer light testers are fitted as standard with sockets for 12 V – ISO 1724 and 24 V – ISO 1185.
* Connects to mains.
* Output power is at 200 W pulsed direct current. There is a switch from 12/24 V and switches for each function.
* It is provided with short-circuit protection.
* Available for only 12 V trailers / caravans, as well as for external battery operation.
* The cabinet is made of steel and aluminum.

 

Trailer light testers are used for checking, troubleshooting and repairing lights on trailers, trailers and caravans.

If a short circuit occurs, unnecessary walk for fuse change is saved. Built-in circuit breaker, just push the button and continue working. Switch is guaranteed to 20 A.

Trailer light tester facilitates troubleshooting on car or trailer.
The control box tests all functions from the driver’s seat.

When using trailer light tests for trailer repair – no unnecessary waiting time for the car.

TRAILER LIGHT TESTER DC / DC – 12126

DC power supply

Order no .: 12126

The use of LED taillights on trucks and trailers / caravans can in some cases cause problems when testing the trailer, as the LED headlights do not suffer from pulsed direct current.

G.S.E. has now eliminated this problem by replacing the transformer in the trailer light tester with a DC / DC DC power supply.

Specifications and enclosure are same as above but; the output power of 12V outlets is now 110W and, the output power of 24V outlets is now 200W.

TRAILER LIGHT TESTER DC / DC – 12251

DC power supply

Order no .: 12251

The use of LED taillights on trucks and trailers / trailers can in some cases cause problems when testing the trailer, as the LED lights do not suffer from pulsed direct current.

G.S.E. has now eliminated this problem by replacing the transformer in the trailer light tester with a DC / DC DC power supply.

Specifications and enclosure are the same as above. The output power of 24V outlets is now 200W direct current.

TRAILER LIGHT TESTER DC / DC – 12256

Trailer light tester 24 V, 2 x 7-pole + 15-pole socket with DC / DC (DC)

Order no .: 12256

In Denmark, it is becoming more widespread with 7 poles. supplementary plugs on trucks and trailers. Therefore, we can now supply a trailer light tester with supplementary socket ISO 3731. This version is also with DC / DC direct current.

TRAILER LIGHT TESTS 12V BUILT-IN BATTERY – 12150

7 pole

Order no .: 12150
Dimensions: 225 MM x 120 MM x 90 MM
Weight: 2.4 Kg. (without charger)

Trailer light tester No. 12150, with its built-in battery and small size, can easily and quickly be transported around the various trailers. It is in an impact-resistant ABS housing with a convenient handle, and is easy to use for everyday workshop use.

It comes standard with 7 pole sockets, ISO 1724, 5A battery and battery charger. There is a light switch for each function, as well as a main switch.
In the event of a short circuit / overload, the main switch LED will go out.

It is equipped with a battery indicator that shows:
100% charged = 13.5V
50% charged = 12.0V
25% charged = 11.0V Should be charged.

Press the “BAT TEST” button, the battery will be charged and the battery LEDs will indicate the state of the battery before use.

The trailer light tester is protected against fault polarization, overload with 8 Amp circuit breaker. Switches are guaranteed for 20Amp load.

TRAILER LIGHT TESTS 12V BUILT-IN BATTERY – 12151

13 pole

Order no .: 12151
Dimensions: 225 MM x 120 MM x 90 MM
Weight: 2.4 Kg. (without charger)

Trailer light tester No. 12151, with its built-in battery and small size, can be easily and quickly transported around the various trailers. It is in an impact-resistant ABS housing with a convenient handle, and is easy to use for everyday workshop use.

It comes standard with 13 pole sockets, ISO 1724, 5A battery and battery charger. Cabinet specifications like 12150

There is a light switch for each function, as well as a main switch.
In the event of a short circuit / overload, the main switch LED will go out.

It is equipped with a battery indicator that shows:
100% charged = 13.5V
50% charged = 12.0V
25% charged = 11.0V Should be charged.

Press the “BAT TEST” button, the battery will be charged and the battery LEDs will indicate the state of the battery before use.

The trailer light tester is protected against fault polarization, overload with 8 Amp circuit breaker. Switches are guaranteed for 20Amp load.

TRAILER LIGHT TESTS 12V BATTERY AND RUNNING LIGHT – 12155

Order no .: 12155

The trailer light tester with running lights saves unnecessary walking back and forth during testing.

Turn the switch on automatically and the LEDs of the various functions light up / blink alternately every few seconds.

If manual operation is required during repair and o. Main switch is set to ON, the individual functions can be activated individually.

Cabinet and specifications as above.

Send us an email with your order: order@raco.dk